Phenom Support Answers
A collection of questions that received good ratings and feedback from our customers.
- What is the suggested GC running conditions in the EN 15562 method?
- What is the suggested GC running conditions in the official AOAC 2007.01 method?
- What is the suggested LC running conditions in the EN 15562 method?
- What is the suggested LC running conditions in the official AOAC 2007.01 method?
- What is the suitable pH for Security Link Fittings?
- What is the temperature limit of a column being used in SFC conditions
- What is the temperature resistance range for your sealing mats?
- What is the typical sample loading amount for Claricep flash column?
- What is the void volume inside our Strata X online cartridge?
- What is the void volume inside our Strata-X on-line cartridge?
- What is void volume in SEC?
- What is Z-Sep and what is the Phenomenex recommended alternative?
- What is µElution?
- What makes Verex GC seals easy to use?
- What media / phase do you have for Claricep flash columns?
- What might be causing loss of peak resolution in my LC method?
- What modes can Strata NH2 be used for?
- What modification can you apply for dry samples to improve the extraction step in the QuEChERS method?
- What porosity of filter should I use for samples which will be analyzed using a Kinetex column?
- What problems can blunt needles have on Verex septa?
- What protocol should be used to start up, and shut down, the HPLC system when Rezex is being used?
- What sample pretreatment do you recommend prior to performing the QuEChERS extraction?
- What separation mechanism is used in the separation of sugars? Does this put any restriction on the solvents used?
- What sequence lengths can be used with Clarity OTX?
- What should I consider when choosing between split and splitless injection modes?
- What should I consider when chosing between Kinetex phenylhexyl, biphenyl and F5?
- What should I dissolve my sample in to inject it onto my HPLC column
- What should I do if I can't pull my 100 uL of very viscous serum or other sample through the EZ:faast sorbent tip?
- What should I use to inject a blank or clean the syringe for the EZ:faast GC/MS or GC/FID kit?
- What should the average velocity be for the EZ:faast GC/FID analysis? GC/MS?